• Designed for extra mobility
• Powder coated steel cabinet
• Manufactured to customer's specifications with options to handle R-12, R-22, R-500 & R-502 and all alternates in the same range with one machine utilizing a unique multiple thermal expansion valve design
• One Horsepower Hermetic Compressor
• Pumps to required vacuum levels with no harm to the compressor
• Patented Liquid Injection
• Measurable oil out facilitating the servicing process
• UL listed

Specifications
Series CV
Dimensions
W - 28 in. / 71.1 cm
D - 24 in. / 61.0 cm
H - 45 in. / 114.3 cm
(With cart including casters & wheels)
Weight
223 lbs. / 101kg  (approx.)
Compressor
One horsepower Hermetic
Refrigerants
R-12, R-22, R-134a, R-401A,
R-401B, R-402A, R-402B, R-404A,
R-407C, R-408A, R-409A, R-411A,
R-411B, R-412A, R-414A, R-414B,
R-416A, R-500, R-502. . . and more
Reclaim Capacity
3 lbs. / 1.4 kg liquid per minute
vapor slightly less
Electrical
115/120, 60Hz, 1Ph
Alternate Voltage available upon request
International Voltage available upon request
Amperage
15-amp service required
Storage Capacity (On-board)
15 lbs. / 7 kg
Pressure Gauges
laboratory quality
In/Out Valves
1/4in. / 6.3 mm SAE male flares
Cart
3 in. / 7.6 cm casters on front
10 in. / 25.4 cm wheels on back

Maximum Separation
The Van Steenburgh system provides maximum separation of oil, acid, moisture, and hard particle contaminants through its unique method of pumping the refrigerant liquid or vapor at high velocity and high temperature into the Separation Chamber as it drops to near zero velocity. This causes the oil, acid, water and hard particle contaminants (copper chips, etc.) to drop to the bottom where they can be retrieved along with the maximum amount of retrievable oil.
No other system does this.

Sub-Cooling
The vapor from the Separator passes through the compressor to the air condenser where it is condensed to liquid. It then passes to the Chill Chamber(s) where it is sub-cooled to 15° to 40° F / -9° to 4° C. This aids in the transfer of the refrigerant to a cylinder or system at room temperature or

warmer. It also enhances the drying/filtering process.
No other system does this.

Drying/Filtering
Sub-cooled refrigerant dries more efficiently. We take advantage by re-circulating the sub-cooled refrigerant at the rate of 300-400 lbs. / 136.3 to 181.8 kg an hour (average based on ambient range). This means maximum drying.
No other system does this.

Pump Vapor
The Van Steenburgh system employs patented Compressor Liquid Injection during vapor removal. This means we pump a cylinder or system to atmospheric pressure without harm to the compressor! Get those last pounds. Don't send them back to the vendor with your empty cylinders.
No other system does this.

Non-Condensables Separation
The combination of sub-cooling, which causes non-condensables to rise quicker, and the on-board storage where the refrigerant is constantly being re-circulated, means maximum separation. The "air out" switch allows you to purge all non-condensables.
No other system does this.

Additional Features

• Unique multiple thermal expansion valve design
• Oil Sight Gauge on compressor
• Float valve safety shut off on storage/Chill Chambers (backed by 3 additional safety shut offs to prevent overfilling on-board storage)
• Laboratory quality gauges
• Visual check points to monitor drying
• "Straight through" capability